图片区 偷拍区 小说区

      <pre id="as9cx"></pre>
      <big id="as9cx"><nobr id="as9cx"></nobr></big>
      <strike id="as9cx"></strike>
      <center id="as9cx"></center>
        1. E-mail: sales@gd-chain.com

          News

          Generally, in the production of industrial conveyor chain, we will use special processes such as quenching to deal with the chain, which is conducive to reducing the probability of abrasion of some p…
          For this knowledge, what we should know is that the chain has been used for a long time, and carbon and oil are easy to accumulate on the surface, so how to remove it easily?
          The hoisting chain sling is welded and assembled by metal rings. Compared with flexible sling, it is easy to wear and oxidize.
          Chain transmission mainly refers to the use of various types of chains for transmission. In the process of using general chain transmission, various kinds of chains will be used. According to differe…
          Stainless steel chain is suitable for various use environments
          What is the brake failure of medical roller conveying machinery? What causes it?
          The compact chain used in mine can replace the ring chain with the same nominal diameter, and it does not need to transform the original scraper conveyor.
          Conveyor chain has been widely used in various industries, but it will be passivated in the process of application. What are the causes?
          The chain board conveyor produced by regular manufacturers shall be marked with the maximum wear-resistant lifting capacity, production number date and other parameters in obvious places, which are t…
          The conveyor chain is specially used for the flat top conveyor. Although it is a simple chain, the complex operation environment and less turning radius can damage and deform the chain.
          Four points for attention of non-standard chain surface painting
          If it is not a chain, it will not work well, so the chain is very important. Now, chain products include non-standard chain, scraper chain, roller chain, and other products.
          For the development of the conveyor chain structure and the demand of the conveyor chain, there are differences between pulley and chain, non-standard chain.
          The use environment of the industrial engineering chain is generally not very good, so if you want to have a long service life, it is very important to maintain it.
          When we purchase or replace the drive chain, we should first know the length of the chain, which is the measurement of the replaced chain.
          What degree of plate conveyor chain is used can be regarded as scrap, and the chain will be replaced at this time.
          When the industrial conveying chain is in operation for a period of time, or when it is in commissioning, it often feels loose or tight.
          The principle is to meet the high surface hardness, wear resistance, plasticity at both ends, fatigue strength and other aspects, so as to meet the needs of practical use.
          energy saving and emission reduction has increased the production pressure of high energy consumption and high pollution non-standard chain wholesale, on the other hand, it is constantly promoting ma…
          ?Roller chain is also a kind of chain used to transmit mechanical power. It is a simple, reliable and efficient power transmission device. Tooth chain is an important part of the conveyor line. As …
          What should be done when using new industrial conveyor chains to update old chains?
          Industrial conveyor chain in long-term use, because of some reasons may cause wear and tear, why wear and tear, what measures to prevent wear and tear, the corresponding solutions are provided to you.
          Lubricants play a very important role in the industrial engineering chain, the main one is lubrication, in addition to lubrication, of course, there are other roles, such as oxidation resistance.
          图片区 偷拍区 小说区
              <pre id="as9cx"></pre>
              <big id="as9cx"><nobr id="as9cx"></nobr></big>
              <strike id="as9cx"></strike>
              <center id="as9cx"></center>